Thx
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Caterpillar VIMSPC 2015A
- Thread starter Webmaster
- Start date
Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.You don't have permission to view attachments. Attachments are hidden.
Code:VIMSpc 2015A – Release Notes July 28, 2015 Versions Shipped with this release ---------------------------------- * VIMSpc version: 2015A build 5.0.8.0 * Database version: 3.1.0 * Master database version: 15.2.0 New Software Features and Updates --------------------------------- New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them. * All previous versions of VIMSpc, including 2013A, 2011A and 2009B. * VIMS 3G Connect * VIMS Supervisor * TPMpc * PCSpc The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions. Compatible ECM VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A -------------- ------------ ------------ ------------ A4N4 Stand-alone TPM Yes No No A5N2 Telematics Yes No No A5N2 Cost Reduction Yes Yes No A4N4 Yes Yes Yes 523 (A4G4) Yes Yes Yes VIMS ABL2M Yes Yes Yes VIMS 68K Yes Yes Yes TPM ABL1M Yes Yes No TPM Legacy Yes Yes No PCS A4M3 Yes Yes No PCS Legacy Yes Yes No The following list contains the enhancements and modifications of VIMSpc version 2015A: * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8) * VIMSpc can no longer be installed on XP systems starting with this version * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc. * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms. * Added support for A5 telematics module and A4 Stand-alone TPM module. * Added third party interface (TPI) support. * Added support for version 2 of VIMS 3G files. * Added support for value point data logger in trend reports. * Added support for new productivity files in merge and reports (version 1). * Added support for UTC timestamps in VIMS 3G data files. * Added support for public J1939 parameters. * Improved Ethernet connection. * Fixed bugs found in 2013A version. Installation Requirements ------------------------- You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules. System Requirements ------------------- To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed: * IBM PC compatible with Pentium 1 GHz processor or greater * 2 GB RAM * 500 MB of available hard drive space * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions) * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware * Adobe PDF reader * Java 6, 7, or 8 (32-bit version) Support of VIMSpc ----------------- For assistance with this software, contact your Caterpillar Dealer.
Thanks
ThanksCaterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.You don't have permission to view attachments. Attachments are hidden.
Code:VIMSpc 2015A – Release Notes July 28, 2015 Versions Shipped with this release ---------------------------------- * VIMSpc version: 2015A build 5.0.8.0 * Database version: 3.1.0 * Master database version: 15.2.0 New Software Features and Updates --------------------------------- New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them. * All previous versions of VIMSpc, including 2013A, 2011A and 2009B. * VIMS 3G Connect * VIMS Supervisor * TPMpc * PCSpc The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions. Compatible ECM VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A -------------- ------------ ------------ ------------ A4N4 Stand-alone TPM Yes No No A5N2 Telematics Yes No No A5N2 Cost Reduction Yes Yes No A4N4 Yes Yes Yes 523 (A4G4) Yes Yes Yes VIMS ABL2M Yes Yes Yes VIMS 68K Yes Yes Yes TPM ABL1M Yes Yes No TPM Legacy Yes Yes No PCS A4M3 Yes Yes No PCS Legacy Yes Yes No The following list contains the enhancements and modifications of VIMSpc version 2015A: * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8) * VIMSpc can no longer be installed on XP systems starting with this version * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc. * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms. * Added support for A5 telematics module and A4 Stand-alone TPM module. * Added third party interface (TPI) support. * Added support for version 2 of VIMS 3G files. * Added support for value point data logger in trend reports. * Added support for new productivity files in merge and reports (version 1). * Added support for UTC timestamps in VIMS 3G data files. * Added support for public J1939 parameters. * Improved Ethernet connection. * Fixed bugs found in 2013A version. Installation Requirements ------------------------- You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules. System Requirements ------------------- To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed: * IBM PC compatible with Pentium 1 GHz processor or greater * 2 GB RAM * 500 MB of available hard drive space * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions) * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware * Adobe PDF reader * Java 6, 7, or 8 (32-bit version) Support of VIMSpc ----------------- For assistance with this software, contact your Caterpillar Dealer.
haidonginfo
New Member
- Credits
- 0
thanks alot
sahabat diesel
New Member
- Credits
- 0
Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.You don't have permission to view attachments. Attachments are hidden.
Code:VIMSpc 2015A – Release Notes July 28, 2015 Versions Shipped with this release ---------------------------------- * VIMSpc version: 2015A build 5.0.8.0 * Database version: 3.1.0 * Master database version: 15.2.0 New Software Features and Updates --------------------------------- New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them. * All previous versions of VIMSpc, including 2013A, 2011A and 2009B. * VIMS 3G Connect * VIMS Supervisor * TPMpc * PCSpc The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions. Compatible ECM VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A -------------- ------------ ------------ ------------ A4N4 Stand-alone TPM Yes No No A5N2 Telematics Yes No No A5N2 Cost Reduction Yes Yes No A4N4 Yes Yes Yes 523 (A4G4) Yes Yes Yes VIMS ABL2M Yes Yes Yes VIMS 68K Yes Yes Yes TPM ABL1M Yes Yes No TPM Legacy Yes Yes No PCS A4M3 Yes Yes No PCS Legacy Yes Yes No The following list contains the enhancements and modifications of VIMSpc version 2015A: * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8) * VIMSpc can no longer be installed on XP systems starting with this version * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc. * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms. * Added support for A5 telematics module and A4 Stand-alone TPM module. * Added third party interface (TPI) support. * Added support for version 2 of VIMS 3G files. * Added support for value point data logger in trend reports. * Added support for new productivity files in merge and reports (version 1). * Added support for UTC timestamps in VIMS 3G data files. * Added support for public J1939 parameters. * Improved Ethernet connection. * Fixed bugs found in 2013A version. Installation Requirements ------------------------- You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules. System Requirements ------------------- To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed: * IBM PC compatible with Pentium 1 GHz processor or greater * 2 GB RAM * 500 MB of available hard drive space * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions) * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware * Adobe PDF reader * Java 6, 7, or 8 (32-bit version) Support of VIMSpc ----------------- For assistance with this software, contact your Caterpillar Dealer.
Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.You don't have permission to view attachments. Attachments are hidden.
Code:VIMSpc 2015A – Release Notes July 28, 2015 Versions Shipped with this release ---------------------------------- * VIMSpc version: 2015A build 5.0.8.0 * Database version: 3.1.0 * Master database version: 15.2.0 New Software Features and Updates --------------------------------- New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them. * All previous versions of VIMSpc, including 2013A, 2011A and 2009B. * VIMS 3G Connect * VIMS Supervisor * TPMpc * PCSpc The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions. Compatible ECM VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A -------------- ------------ ------------ ------------ A4N4 Stand-alone TPM Yes No No A5N2 Telematics Yes No No A5N2 Cost Reduction Yes Yes No A4N4 Yes Yes Yes 523 (A4G4) Yes Yes Yes VIMS ABL2M Yes Yes Yes VIMS 68K Yes Yes Yes TPM ABL1M Yes Yes No TPM Legacy Yes Yes No PCS A4M3 Yes Yes No PCS Legacy Yes Yes No The following list contains the enhancements and modifications of VIMSpc version 2015A: * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8) * VIMSpc can no longer be installed on XP systems starting with this version * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc. * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms. * Added support for A5 telematics module and A4 Stand-alone TPM module. * Added third party interface (TPI) support. * Added support for version 2 of VIMS 3G files. * Added support for value point data logger in trend reports. * Added support for new productivity files in merge and reports (version 1). * Added support for UTC timestamps in VIMS 3G data files. * Added support for public J1939 parameters. * Improved Ethernet connection. * Fixed bugs found in 2013A version. Installation Requirements ------------------------- You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules. System Requirements ------------------- To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed: * IBM PC compatible with Pentium 1 GHz processor or greater * 2 GB RAM * 500 MB of available hard drive space * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions) * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware * Adobe PDF reader * Java 6, 7, or 8 (32-bit version) Support of VIMSpc ----------------- For assistance with this software, contact your Caterpillar Dealer.
Dmitry Golubev
New Member
- Credits
- 0
Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.You don't have permission to view attachments. Attachments are hidden.
Code:VIMSpc 2015A – Release Notes July 28, 2015 Versions Shipped with this release ---------------------------------- * VIMSpc version: 2015A build 5.0.8.0 * Database version: 3.1.0 * Master database version: 15.2.0 New Software Features and Updates --------------------------------- New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them. * All previous versions of VIMSpc, including 2013A, 2011A and 2009B. * VIMS 3G Connect * VIMS Supervisor * TPMpc * PCSpc The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions. Compatible ECM VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A -------------- ------------ ------------ ------------ A4N4 Stand-alone TPM Yes No No A5N2 Telematics Yes No No A5N2 Cost Reduction Yes Yes No A4N4 Yes Yes Yes 523 (A4G4) Yes Yes Yes VIMS ABL2M Yes Yes Yes VIMS 68K Yes Yes Yes TPM ABL1M Yes Yes No TPM Legacy Yes Yes No PCS A4M3 Yes Yes No PCS Legacy Yes Yes No The following list contains the enhancements and modifications of VIMSpc version 2015A: * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8) * VIMSpc can no longer be installed on XP systems starting with this version * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc. * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms. * Added support for A5 telematics module and A4 Stand-alone TPM module. * Added third party interface (TPI) support. * Added support for version 2 of VIMS 3G files. * Added support for value point data logger in trend reports. * Added support for new productivity files in merge and reports (version 1). * Added support for UTC timestamps in VIMS 3G data files. * Added support for public J1939 parameters. * Improved Ethernet connection. * Fixed bugs found in 2013A version. Installation Requirements ------------------------- You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules. System Requirements ------------------- To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed: * IBM PC compatible with Pentium 1 GHz processor or greater * 2 GB RAM * 500 MB of available hard drive space * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions) * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware * Adobe PDF reader * Java 6, 7, or 8 (32-bit version) Support of VIMSpc ----------------- For assistance with this software, contact your Caterpillar Dealer.
Thanks for support
Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.You don't have permission to view attachments. Attachments are hidden.
Code:VIMSpc 2015A – Release Notes July 28, 2015 Versions Shipped with this release ---------------------------------- * VIMSpc version: 2015A build 5.0.8.0 * Database version: 3.1.0 * Master database version: 15.2.0 New Software Features and Updates --------------------------------- New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them. * All previous versions of VIMSpc, including 2013A, 2011A and 2009B. * VIMS 3G Connect * VIMS Supervisor * TPMpc * PCSpc The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions. Compatible ECM VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A -------------- ------------ ------------ ------------ A4N4 Stand-alone TPM Yes No No A5N2 Telematics Yes No No A5N2 Cost Reduction Yes Yes No A4N4 Yes Yes Yes 523 (A4G4) Yes Yes Yes VIMS ABL2M Yes Yes Yes VIMS 68K Yes Yes Yes TPM ABL1M Yes Yes No TPM Legacy Yes Yes No PCS A4M3 Yes Yes No PCS Legacy Yes Yes No The following list contains the enhancements and modifications of VIMSpc version 2015A: * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8) * VIMSpc can no longer be installed on XP systems starting with this version * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc. * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms. * Added support for A5 telematics module and A4 Stand-alone TPM module. * Added third party interface (TPI) support. * Added support for version 2 of VIMS 3G files. * Added support for value point data logger in trend reports. * Added support for new productivity files in merge and reports (version 1). * Added support for UTC timestamps in VIMS 3G data files. * Added support for public J1939 parameters. * Improved Ethernet connection. * Fixed bugs found in 2013A version. Installation Requirements ------------------------- You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules. System Requirements ------------------- To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed: * IBM PC compatible with Pentium 1 GHz processor or greater * 2 GB RAM * 500 MB of available hard drive space * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions) * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware * Adobe PDF reader * Java 6, 7, or 8 (32-bit version) Support of VIMSpc ----------------- For assistance with this software, contact your Caterpillar Dealer.
THANK U
ThanksCaterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.You don't have permission to view attachments. Attachments are hidden.
Code:VIMSpc 2015A – Release Notes July 28, 2015 Versions Shipped with this release ---------------------------------- * VIMSpc version: 2015A build 5.0.8.0 * Database version: 3.1.0 * Master database version: 15.2.0 New Software Features and Updates --------------------------------- New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them. * All previous versions of VIMSpc, including 2013A, 2011A and 2009B. * VIMS 3G Connect * VIMS Supervisor * TPMpc * PCSpc The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions. Compatible ECM VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A -------------- ------------ ------------ ------------ A4N4 Stand-alone TPM Yes No No A5N2 Telematics Yes No No A5N2 Cost Reduction Yes Yes No A4N4 Yes Yes Yes 523 (A4G4) Yes Yes Yes VIMS ABL2M Yes Yes Yes VIMS 68K Yes Yes Yes TPM ABL1M Yes Yes No TPM Legacy Yes Yes No PCS A4M3 Yes Yes No PCS Legacy Yes Yes No The following list contains the enhancements and modifications of VIMSpc version 2015A: * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8) * VIMSpc can no longer be installed on XP systems starting with this version * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc. * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms. * Added support for A5 telematics module and A4 Stand-alone TPM module. * Added third party interface (TPI) support. * Added support for version 2 of VIMS 3G files. * Added support for value point data logger in trend reports. * Added support for new productivity files in merge and reports (version 1). * Added support for UTC timestamps in VIMS 3G data files. * Added support for public J1939 parameters. * Improved Ethernet connection. * Fixed bugs found in 2013A version. Installation Requirements ------------------------- You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules. System Requirements ------------------- To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed: * IBM PC compatible with Pentium 1 GHz processor or greater * 2 GB RAM * 500 MB of available hard drive space * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions) * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware * Adobe PDF reader * Java 6, 7, or 8 (32-bit version) Support of VIMSpc ----------------- For assistance with this software, contact your Caterpillar Dealer.
Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.You don't have permission to view attachments. Attachments are hidden.
Code:VIMSpc 2015A – Release Notes July 28, 2015 Versions Shipped with this release ---------------------------------- * VIMSpc version: 2015A build 5.0.8.0 * Database version: 3.1.0 * Master database version: 15.2.0 New Software Features and Updates --------------------------------- New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them. * All previous versions of VIMSpc, including 2013A, 2011A and 2009B. * VIMS 3G Connect * VIMS Supervisor * TPMpc * PCSpc The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions. Compatible ECM VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A -------------- ------------ ------------ ------------ A4N4 Stand-alone TPM Yes No No A5N2 Telematics Yes No No A5N2 Cost Reduction Yes Yes No A4N4 Yes Yes Yes 523 (A4G4) Yes Yes Yes VIMS ABL2M Yes Yes Yes VIMS 68K Yes Yes Yes TPM ABL1M Yes Yes No TPM Legacy Yes Yes No PCS A4M3 Yes Yes No PCS Legacy Yes Yes No The following list contains the enhancements and modifications of VIMSpc version 2015A: * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8) * VIMSpc can no longer be installed on XP systems starting with this version * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc. * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms. * Added support for A5 telematics module and A4 Stand-alone TPM module. * Added third party interface (TPI) support. * Added support for version 2 of VIMS 3G files. * Added support for value point data logger in trend reports. * Added support for new productivity files in merge and reports (version 1). * Added support for UTC timestamps in VIMS 3G data files. * Added support for public J1939 parameters. * Improved Ethernet connection. * Fixed bugs found in 2013A version. Installation Requirements ------------------------- You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules. System Requirements ------------------- To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed: * IBM PC compatible with Pentium 1 GHz processor or greater * 2 GB RAM * 500 MB of available hard drive space * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions) * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware * Adobe PDF reader * Java 6, 7, or 8 (32-bit version) Support of VIMSpc ----------------- For assistance with this software, contact your Caterpillar Dealer.
THX
carlinesmx
Moderator
- Credits
- 0
Gracias porel aporte.muy util[ADJUNTAR=completo]126[/ADJUNTAR]El Sistema de gestión de información vital (VIMS) de Caterpillar es una potente herramienta para la gestión de máquinas que proporciona a los operadores, al personal de servicio y a los gerentes información sobre una amplia gama de funciones vitales de las máquinas. Numerosos sensores están integrados en el diseño del vehículo. Si VIMS detecta una condición impeditiva o anormal en cualquiera de los sistemas de la máquina, alertará al operador y le indicará que tome las medidas adecuadas, ya sea modificando el funcionamiento de la máquina, notificando al taller sobre el mantenimiento necesario o realizando un apagado seguro de la máquina. Esto mejora la disponibilidad, la vida útil de los componentes y la producción, al tiempo que reduce tanto el costo de reparación como el riesgo de una falla catastrófica. En los camiones mineros Caterpillar y los cargadores de ruedas grandes, VIMS también incluye información de producción y rendimiento. Registra los distintos elementos del ciclo del camión: tiempo de carga, viaje cargado, tiempo de volcado y viaje vacío, junto con los tiempos de retraso. Toda esta información se utiliza para crear informes y gráficos útiles. Estos informes conducen a análisis inteligentes y a una mejor toma de decisiones para una operación más eficiente, reduciendo el costo por tonelada.
[CÓDIGO]VIMSpc 2015A – Notas de la versión
28 de julio de 2015
Versiones enviadas con esta versión
----------------------------------
* Versión VIMSpc: 2015A compilación 5.0.8.0
* Versión de la base de datos: 3.1.0
* Versión de la base de datos maestra: 15.2.0
Nuevas funciones y actualizaciones de software
---------------------------------
El nuevo software VIMSpc ya está disponible. VIMSpc versión 2015A contiene funcionalidades de los siguientes productos de software existentes y sirve como reemplazo para ellos.
* Todas las versiones anteriores de VIMSpc, incluidas 2013A, 2011A y 2009B.
* Conexión VIMS 3G
* Supervisor VIMS
*TPMPc
* PCpc
La siguiente tabla compara la capacidad para conectarse a varias plataformas de hardware entre las versiones VIMSpc 2015A y 2011A.
ECM compatible VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A
-------------- ------------ ------------ ------------
A4N4 TPM independiente Sí No No
A5N2 Telemática Sí No No
Reducción de costos A5N2 Sí Sí No
A4N4 Sí Sí Sí
523 (A4G4) Sí Sí Sí
VIMS ABL2M Sí Sí Sí
VIMS 68K Sí Sí Sí
TPM ABL1M Sí Sí No
TPM heredado Sí Sí No
PCS A4M3 Sí Sí No
PCS heredado Sí Sí No
La siguiente lista contiene las mejoras y modificaciones de VIMSpc versión 2015A:
* El usuario debe instalar Java antes de instalar VIMSpc (admite las versiones 6, 7 y 8 de Java de 32 bits)
* VIMSpc ya no se puede instalar en sistemas XP a partir de esta versión
* Incluye la funcionalidad de VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc y TPMpc.
* Admite plataformas de hardware VIMS A5, A4, 522, 523, ABL2M y 68K.
* Se agregó soporte para el módulo telemático A5 y el módulo TPM independiente A4.
* Se agregó compatibilidad con interfaz de terceros (TPI).
* Se agregó soporte para la versión 2 de archivos VIMS 3G.
* Se agregó soporte para el registrador de datos de puntos de valor en los informes de tendencias.
* Se agregó soporte para nuevos archivos de productividad en combinación e informes (versión 1).
* Se agregó soporte para marcas de tiempo UTC en archivos de datos VIMS 3G.
* Se agregó soporte para parámetros públicos J1939.
* Conexión Ethernet mejorada.
* Se corrigieron errores encontrados en la versión 2013A.
requerimientos de instalación
-------------------------
Debe ser administrador para instalar VIMSpc. Se deben quitar todas las tarjetas aéreas y apagar la VPN antes de la instalación y cuando se ejecuta VIMSpc mientras se conecta a los módulos VIMS3G.
Requisitos del sistema
-------------------
Para ejecutar VIMSpc con éxito, se necesitan el siguiente hardware informático, hardware y cables de comunicación y software:
* IBM PC compatible con procesador Pentium de 1 GHz o superior
* 2 GB de RAM
* 500 MB de espacio disponible en el disco duro
* SO compatible: Windows 7 y 8 (versiones de 32 y 64 bits)
* Puerto RS232 con UART 16550AF (o compatible) O puerto USB 1.1 o 2.0 con un adaptador de puerto USB a serie (P/N: 370-8059) para usar con el cable de descarga VIMS (P/N: 127-9797) para VIMS ABL y hardware de 68K
* Puerto Ethernet para usar con el cable de descarga VIMS 3G (P/N: 425-6889) para hardware VIMS 3G
* Lector de PDF de Adobe
* Java 6, 7 u 8 (versión de 32 bits)
Soporte de VIMSpc
-----------------
Para obtener ayuda con este software, comuníquese con su distribuidor Caterpillar.[/CODE]
Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.You don't have permission to view attachments. Attachments are hidden.
Code:VIMSpc 2015A – Release Notes July 28, 2015 Versions Shipped with this release ---------------------------------- * VIMSpc version: 2015A build 5.0.8.0 * Database version: 3.1.0 * Master database version: 15.2.0 New Software Features and Updates --------------------------------- New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them. * All previous versions of VIMSpc, including 2013A, 2011A and 2009B. * VIMS 3G Connect * VIMS Supervisor * TPMpc * PCSpc The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions. Compatible ECM VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A -------------- ------------ ------------ ------------ A4N4 Stand-alone TPM Yes No No A5N2 Telematics Yes No No A5N2 Cost Reduction Yes Yes No A4N4 Yes Yes Yes 523 (A4G4) Yes Yes Yes VIMS ABL2M Yes Yes Yes VIMS 68K Yes Yes Yes TPM ABL1M Yes Yes No TPM Legacy Yes Yes No PCS A4M3 Yes Yes No PCS Legacy Yes Yes No The following list contains the enhancements and modifications of VIMSpc version 2015A: * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8) * VIMSpc can no longer be installed on XP systems starting with this version * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc. * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms. * Added support for A5 telematics module and A4 Stand-alone TPM module. * Added third party interface (TPI) support. * Added support for version 2 of VIMS 3G files. * Added support for value point data logger in trend reports. * Added support for new productivity files in merge and reports (version 1). * Added support for UTC timestamps in VIMS 3G data files. * Added support for public J1939 parameters. * Improved Ethernet connection. * Fixed bugs found in 2013A version. Installation Requirements ------------------------- You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules. System Requirements ------------------- To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed: * IBM PC compatible with Pentium 1 GHz processor or greater * 2 GB RAM * 500 MB of available hard drive space * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions) * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware * Adobe PDF reader * Java 6, 7, or 8 (32-bit version) Support of VIMSpc ----------------- For assistance with this software, contact your Caterpillar Dealer.
carlinesmx
Moderator
- Credits
- 0
No funciona el enlace de Mega,he hecho la invitacion de cervezas para nada:??[ADJUNTAR=completo]126[/ADJUNTAR]El Sistema de gestión de información vital (VIMS) de Caterpillar es una potente herramienta para la gestión de máquinas que proporciona a los operadores, al personal de servicio y a los gerentes información sobre una amplia gama de funciones vitales de las máquinas. Numerosos sensores están integrados en el diseño del vehículo. Si VIMS detecta una condición impedimento o anormal en cualquiera de los sistemas de la máquina, alertará al operador y le indicará que tome las medidas adecuadas, ya sea modificando el funcionamiento de la máquina, notificando al taller sobre el mantenimiento necesario o realizando un apagado seguro de la máquina. Esto mejora la disponibilidad, la vida útil de los componentes y la producción, al tiempo que reduce tanto el costo de reparación como el riesgo de una falla catastrófica. En los camiones mineros Caterpillar y los cargadores de ruedas grandes, VIMS también incluye información de producción y rendimiento. Registra los distintos elementos del ciclo del camión: tiempo de carga, viaje cargado, tiempo de volcado y viaje vacío, junto con los tiempos de retraso. Toda esta información se utiliza para crear informes y gráficos útiles. Estos informes conducen a análisis inteligentes y a una mejor toma de decisiones para una operación más eficiente, reduciendo el costo por tonelada.
[CÓDIGO]VIMSpc 2015A – Notas de la versión
28 de julio de 2015
Versiones enviadas con esta versión
----------------------------------
* Versión VIMSpc: 2015A compilación 5.0.8.0
* Versión de la base de datos: 3.1.0
* Versión de la base de datos maestra: 15.2.0
Nuevas funciones y actualizaciones de software
---------------------------------
El nuevo software VIMSpc ya está disponible. VIMSpc versión 2015A contiene funcionalidades de los siguientes productos de software existentes y sirve como reemplazo para ellos.
* Todas las versiones anteriores de VIMSpc, incluidas 2013A, 2011A y 2009B.
* Conexión VIMS 3G
* Supervisor VIMS
*TPMPc
* PCpc
La siguiente tabla compara la capacidad para conectarse a varias plataformas de hardware entre las versiones VIMSpc 2015A y 2011A.
ECM compatible VIMSpc 2015A VIMSpc 2013A VIMSpc 2011A
-------------- ------------ ------------ ------------
A4N4 TPM independiente Sí No No
A5N2 Telemática Sí No No
Reducción de costos A5N2 Sí Sí No
A4N4 Sí Sí Sí
523 (A4G4) Sí Sí Sí
VIMS ABL2M Sí Sí Sí
VIMS 68K Sí Sí Sí
TPM ABL1M Sí Sí No
TPM heredado Sí Sí No
PCS A4M3 Sí Sí No
PCS heredado Sí Sí No
La siguiente lista contiene las mejoras y modificaciones de VIMSpc versión 2015A:
* El usuario debe instalar Java antes de instalar VIMSpc (admite las versiones 6, 7 y 8 de Java de 32 bits)
* VIMSpc ya no se puede instalar en sistemas XP a partir de esta versión
* Incluye la funcionalidad de VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc y TPMpc.
* Admite plataformas de hardware VIMS A5, A4, 522, 523, ABL2M y 68K.
* Se agregó soporte para el módulo telemático A5 y el módulo TPM independiente A4.
* Se agregó compatibilidad con interfaz de terceros (TPI).
* Se agregó soporte para la versión 2 de archivos VIMS 3G.
* Se agregó soporte para el registrador de datos de puntos de valor en los informes de tendencias.
* Se agregó soporte para nuevos archivos de productividad en combinación e informes (versión 1).
* Se agregó soporte para marcas de tiempo UTC en archivos de datos VIMS 3G.
* Se agregó soporte para parámetros públicos J1939.
* Conexión Ethernet mejorada.
* Se corrigieron errores encontrados en la versión 2013A.
requerimientos de instalación
-------------------------
Debe ser administrador para instalar VIMSpc. Se deben quitar todas las tarjetas aéreas y apagar la VPN antes de la instalación y cuando se ejecuta VIMSpc mientras se conecta a los módulos VIMS3G.
Requisitos del sistema
-------------------
Para ejecutar VIMSpc con éxito, se necesitan el siguiente hardware informático, hardware y cables de comunicación y software:
* IBM PC compatible con procesador Pentium de 1 GHz o superior
* 2 GB de RAM
* 500 MB de espacio disponible en el disco duro
* SO compatible: Windows 7 y 8 (versiones de 32 y 64 bits)
* Puerto RS232 con UART 16550AF (o compatible) O puerto USB 1.1 o 2.0 con un adaptador de puerto USB a serie (P/N: 370-8059) para usar con el cable de descarga VIMS (P/N: 127-9797) para VIMS ABL y hardware de 68K
* Puerto Ethernet para usar con el cable de descarga VIMS 3G (P/N: 425-6889) para hardware VIMS 3G
* Lector de PDF de Adobe
* Java 6, 7 u 8 (versión de 32 bits)
Soporte de VIMSpc
-----------------
Para obtener ayuda con este software, comuníquese con su distribuidor Caterpillar.[/CODE]
carlinesmx
Moderator
- Credits
- 0
Algun enlace opertivo para VIMS? lo necesito,muchas gracias